10 Best Floor Jacks for Trucks (August 2026) Reviewed
The best floor jacks for trucks balance enough rated capacity with the lift range your suspension and service points demand. A compact pickup, a full-size SUV, and a lifted heavy-duty truck may all need a different answer, so I compared the 10 researched hydraulic floor jacks by their published capacity, height range, construction, safety features, and buyer feedback.
For normal tire rotations, brake work, and oil changes, a 3-ton floor jack is the practical starting point many truck owners discuss. For a heavy 3/4-ton or one-ton truck, I would focus on the 4- and 5-ton choices below, then confirm the vehicle manual’s specified lifting point and never support the truck with the jack alone.
This guide is for a solid, level home-garage surface rather than trail recovery. If your truck regularly leaves pavement, see our guide to off-road jacks for trucks; owners who also maintain very low vehicles can compare low-profile aluminum floor jacks.
The Top 3 Floor Jacks for Trucks Are These Picks in 2026
BIG RED is my all-around pick for its low 3.125-inch entry height, 20-inch maximum height, 3-ton rating, and stated seven-stroke dual-pump lift. AV Steel offers a similar 3-ton, low-profile layout with more review volume, while Maxority is the capacity-first option for buyers who need a published 5-ton rating.
These Are the Best Floor Jacks for Trucks in August 2026
Use the comparison below as the short answer: choose by rated capacity first, then make sure the listed minimum and maximum heights work with your truck. A higher capacity does not replace correct placement, level ground, and appropriately rated jack stands.
| # | Product | Key Features | |
|---|---|---|---|
| 1 |  |
|
Check Latest Price |
| 2 |  |
|
Check Latest Price |
| 3 |  |
|
Check Latest Price |
| 4 |  |
|
Check Latest Price |
| 5 |  |
|
Check Latest Price |
| 6 |  |
|
Check Latest Price |
| 7 |  |
|
Check Latest Price |
| 8 |  |
|
Check Latest Price |
| 9 |  |
|
Check Latest Price |
| 10 |  |
|
Check Latest Price |
We earn from qualifying purchases.
1. BIG RED 3 Ton Low Profile Is the Best All-Around Truck Jack
- Low 3.125 inch entry
- Seven-stroke dual pump
- Steel frame
- Overload valve
- 3 ton limit
- Only 20 reviews
3 ton
3.125 to 20 inch lift
Dual quick pump
The BIG RED combines the measurements I want for a typical half-ton truck that also shares garage space with a lower vehicle: a 3.125-inch minimum height and a 20-inch maximum height. Its 6,600-pound rating, steel construction, and overload valve give it a clear everyday-maintenance focus.
The published dual-piston system reaches lifting height in seven strokes, which matters when rotating four tires or doing repeated brake work. Two front universal casters and two swivel rear wheels are meant to make placement less awkward in a crowded bay.
The best fit is a light-duty truck owner who wants fast everyday service
I would shortlist this model for an F-150-, Silverado 1500-, or Ram 1500-class owner who needs a floor jack for driveway or garage maintenance and has properly rated stands. The low entry height is also helpful where a truck’s lower front crossmember is the lift point.
Its stated safety certifications and one-year manufacturer warranty add useful confidence, but they do not change the need to inspect the saddle, wheels, and hydraulic action before every lift.
The limitation is its 3-ton rating for heavier truck classes
A 3-ton rating is not my first recommendation for a heavily equipped F-250, Ram 2500, or larger truck when a 4- or 5-ton option is available. Match the jack to the job and follow the vehicle maker’s approved lift locations rather than lifting by a random suspension component.
There are only 20 recorded reviews in the research data, so the 4.9 rating is encouraging but based on a much smaller sample than several alternatives here.
2. AV Steel 3 Ton Low Profile Is a Strong General-Service Alternative
- 6600 lb rating
- Low profile
- Dual pistons
- Overload protection
- Rotating saddle
- Color varies
- 3 ton capacity
3 ton
3.125 to 19.875 inch lift
Dual pistons
AV Steel publishes almost the same useful height window as the BIG RED: 3-1/8 inches at the low end and 19-7/8 inches at the high end. The 3-ton hydraulic jack is built from alloy steel and uses a dual-piston quick-lift pump.
I like that the specifications call out both overload protection and a 360-degree rotatable saddle. Those details can make alignment at a designated truck lifting point more controlled, although the operator still needs to lower the vehicle slowly.
The best fit is a truck owner who values a broader review sample
This is a sensible candidate for routine work on a light truck or SUV if the listed 6,600-pound capacity suits the application. It has a 4.7 rating from 184 reviews in the provided data, offering more feedback volume than several newer listings.
Forum conversations commonly settle on a 3-ton floor jack as the minimum for ordinary truck service. That is a starting point, not permission to ignore your actual vehicle weight, load, or lifting geometry.
The decision point is lift height rather than raw capacity
At 19-7/8 inches maximum, this jack can handle standard maintenance positions, but it is not a substitute for a purpose-built high-lift design on a significantly lifted truck. Measure from your intended jack point to the ground with the suspension settled.
The research notes that the finish may vary, which is cosmetic, but the more important inspection is whether the release valve gives you smooth, predictable control before you put a truck in the air.
3. LARBANKE 4 Ton Is the Better Capacity Step-Up for Full-Size Trucks
- 8800 lb rating
- 20.98 inch maximum
- Dual pump
- Rubber pad
- Long handle
- 3.93 inch minimum
- Non-Prime listing
4 ton
3.93 to 20.98 inch lift
Carbon steel
The LARBANKE moves to a published 4-ton, or 8,800-pound, capacity while retaining a 20.98-inch maximum lift height. That extra rating makes more sense to me for owners who service a full-size truck with heavier options or gear than a basic half-ton pickup.
Its carbon-steel body, rubber pad, long handle, fixed wheels, and swivel casters point toward a conventional heavy-duty garage jack. The dual-pump system is intended to reduce the number of handle strokes required to reach the truck.
The best fit is a full-size pickup or large SUV needing more rating margin
Choose this 4-ton model when capacity headroom matters more than an ultra-low entry height. The provided reviews describe it as suitable for larger SUVs and pickup trucks, and its rating is backed by 155 reviews at 4.7 stars.
A higher jack rating does not mean you can support a truck at one point indefinitely. Lift only as high as needed, place stands under approved support locations, then lower the truck gently onto those stands.
The tradeoff is its nearly 4-inch minimum height
The 3.93-inch minimum height will not be as flexible as the 3.125-inch low-profile models if your truck has a very low front air dam or you also maintain a low car. It remains appropriate for normal-height trucks where the jack point is accessible.
The data shows a rubber pad, which can help protect a contact area, but a pad cannot make an improper lifting point safe. Check the owner’s manual before choosing the crossmember, frame, or axle location.
4. Strongway 3 Ton Off-Road Is the High-Lift Choice for Uneven Terrain
- 29 inch lift
- Steel skid plate
- Quick-change saddle
- Dual pump
- Swivel casters
- 90.8 lb weight
- Not low profile
3 ton
29 inch maximum lift
Skid plate
The Strongway off-road model answers a different problem than a normal garage floor jack: it is rated at 3 tons with a 29-inch maximum lift height and a full-length steel skid plate. Its listing specifically identifies trucks, SUVs, ATVs, and UTVs.
The skid plate spreads load over a broader contact area on sand, gravel, mud, and other soft surfaces. A quick-change saddle with an adjustable height extension also makes this model more adaptable to varied vehicle jack points.
The best fit is an off-road truck that needs reach and a broad base
I would choose this format for a truck that needs service or recovery-related lifting away from smooth concrete, provided conditions are stable enough for the task. The 29-inch height is the standout specification for a lifted truck where a conventional 20-inch jack runs out of travel.
Community feedback in the research repeatedly calls out off-road-specific jacks for lifted Jeeps and trucks. That concern is real: a tall truck needs both enough height and a base that is suited to the ground.
The limitation is that it is not a compact low-profile garage jack
At 90.8 pounds, this aluminum-frame model is still a substantial piece of equipment, so portability means manageable positioning rather than one-handed carrying. The listing’s recorded minimum-height field is inconsistent with its high-lift design, so verify the physical entry clearance before ordering.
For a permanent workshop with level concrete, a normal low-profile jack may be simpler. For a broader shop setup, our guide to four-post car lifts for home garage explains another route for frequent maintenance.
5. Jack Boss 4 Ton Is a Low-Profile Heavy-Duty Garage Jack
- 8800 lb capacity
- 3.8 inch entry
- Fast dual pump
- Wide stance
- One-year warranty
- Heavy iron body
- 52 reviews
4 ton
3.8 to 20 inch lift
Dual piston pump
Jack Boss combines a published 4-ton capacity with a 3.8-inch minimum height and 20-inch maximum height. That is a useful middle ground for someone who wants heavier-duty capacity but still needs a low-profile floor jack for a normal garage.
The manufacturer says its dual piston pump can lift five times faster than a single-pump setup. I would treat that as a convenience claim rather than a safety feature; the useful safety detail is the broad stance and the need for stable, deliberate placement.
The best fit is a heavy truck owner with limited floor clearance
This jack works on paper for a full-size truck or SUV that does not need the 24- to 29-inch reach of the specialty Strongway designs. Its 8,800-pound rating adds capacity room over all of the 3-ton picks.
It ranks number two in Floor Jacks in the supplied product data, though the recorded 4.7 rating comes from 52 reviews. Use that as one signal alongside the real fit of its range under your truck.
The consideration is the weight of an iron floor jack
The listed iron construction and 45.36-kilogram weight mean this is built for stationary garage use more than frequent transport. Forum users often point out that heavy steel jacks can be tiresome to move, especially over cracked pavement or thresholds.
Store it with the ram fully lowered, keep the wheels clear of debris, and do not drag the saddle or handle against the truck when repositioning.
6. Strongway Long-Reach 3 Ton Reaches Deep Under a Truck
- 24 inch maximum
- 3.35 inch entry
- 3.5-pump lift
- Precision-welded steel
- 103 lb weight
- 3 ton limit
3 ton
3.35 to 24 inch lift
Long-reach steel
The Strongway long-reach model is a useful answer when a truck’s intended lifting point sits farther inboard than a short chassis can comfortably reach. Its published lift range is 3.35 to 24 inches, and it is rated at 3 tons.
The listing says it reaches working height in three and a half pumps. A quick rise is helpful, but I would still stop early, inspect saddle alignment, and make a small correction before lifting farther.
The best fit is a truck with a distant crossmember or central lift point
The 24-inch maximum height gives it four more inches than several standard service jacks in this guide. That can be helpful for tire changes where stand height and wheel clearance demand a little extra space.
Its 3.35-inch minimum is also genuinely low-profile for a long-reach steel model. Measure the distance from the bumper edge to the designated jack point if reach is why you are considering it.
The drawback is a 103-pound steel chassis
At 103 pounds, this is among the heaviest jacks listed, so it is best kept where it will be used rather than loaded in and out of a truck bed. The 3-ton capacity also keeps it in the light-duty-to-standard full-size service category.
If your primary concern is a very heavy truck, capacity is the first filter. A longer arm cannot compensate for choosing a jack with insufficient rated capacity.
7. Auto Dynasty 4 Ton Is a Straightforward Steel Truck Jack
- 8000 lb capacity
- Steel construction
- Large saddle
- Quick lift
- Safety valve
- 4.5 inch minimum
- 29 reviews
4 ton
4.5 to 20 inch lift
Dual piston pump
The Auto Dynasty is a 4-ton alloy-steel hydraulic floor jack with a published 4.5- to 20-inch range. It has dual pistons, a large saddle, casters, and a built-in safety release valve, making its intended job easy to understand: ordinary truck and SUV service on a hard, flat floor.
Its stated 8,000-pound load capacity is slightly different from the 8,800-pound figures on the other 4-ton models, so use the manufacturer’s stated rating rather than assuming every 4-ton jack performs identically.
The best fit is a standard-height truck on smooth garage concrete
This is a reasonable short-list option when your truck has enough ground clearance for a 4.5-inch minimum saddle height. The large saddle and steel body suit controlled lifting at an approved frame or crossmember point.
The product information lists compatibility with cars, SUVs, and trucks, but the fit that matters is physical access to your individual vehicle’s lifting point.
The limitation is the taller minimum height and small review base
At 4.5 inches minimum, this is less versatile for low-clearance work than every low-profile 3-ton option in the opening half of the list. It also has a 4.6 rating from 29 reviews in the supplied data, which is too small a sample to make broad durability claims.
Before committing, test that the jack rolls freely and the valve can lower the load in small increments. Users in truck forums specifically flag abrupt or hard-to-control release valves as a major frustration on lower-end hydraulic jacks.
8. YELLOW JACKET 4 Ton Is a Well-Reviewed Steel Service Option
- 8800 lb capacity
- Overload valve
- Steel construction
- Detachable handle
- 125 reviews
- 87 lb weight
- 4.31 inch minimum
4 ton
4.31 to 19.875 inch lift
Steel body
YELLOW JACKET’s 4-ton jack carries an 8,800-pound rating and a stated 4-5/16- to 19-7/8-inch lifting range. It is an 87-pound alloy-steel unit with a built-in overload safety valve and detachable handle for storage.
I see it as a conventional shop jack for buyers who prioritize a clearly stated capacity and a proven, heavy steel configuration. Its recorded 4.5 rating from 125 reviews supplies a more useful feedback sample than many of the niche 4-ton choices.
The best fit is frequent garage maintenance on a light or full-size truck
The capacity works well for buyers who want more margin than a 3-ton jack provides without moving up to a 5-ton, 100-pound unit. The detachable handle is practical where wall storage or a tight garage matters.
The listing identifies cars and trucks, but owners should still use stands rated for the truck’s supported load. Never place any part of your body beneath a vehicle held solely by this or any other hydraulic jack.
The consideration is its 87-pound weight and average reach
This is not the jack to choose for a lifted truck that needs exceptional height; its maximum is just under 20 inches. It is also not a featherweight portable unit, even if the handle comes apart for storage.
That is the normal steel-versus-aluminum decision: steel generally favors a heavy, planted shop tool, while aluminum or mixed construction can be easier to transport.
9. VEVOR 3 Ton Aluminum and Steel Is the Portable Mixed-Material Pick
- 63 lb weight
- Dual parallel pumps
- Rubber saddle
- Rotating saddle
- Safety certified
- 3 ton capacity
- 4.3 rating
3 ton
3.55 to 19.68 inch lift
Aluminum and steel
VEVOR uses aluminum and steel rather than an all-steel chassis, with a listed 63-pound weight, 3-ton capacity, and a 3.55- to 19.68-inch range. That makes it a more realistic jack to carry between a garage and truck than the 87- to 103-pound steel units.
Its dual parallel pump system, 360-degree rotatable saddle, and rubber padding address the practical parts of routine positioning. The product data also lists CE, UKCA, and ASME certification.
The best fit is a truck owner who needs a lighter 3-ton service jack
If you rotate tires at home but also need to transport a floor jack occasionally, the 63-pound figure is attractive. The low 3.55-inch profile provides good access while the 19.68-inch maximum is suitable for standard service tasks.
This jack has the largest review count in the group at 1,294 reviews, so its 4.3 rating is based on a notably broader sample. I would read recent owner feedback for the specific issues that matter to you, especially hydraulic control and long-term operation.
The tradeoff is capacity margin and mixed-material durability preferences
Aluminum floor jacks can be worth it when lower carrying weight is the priority, but they are not automatically the better choice for a heavy truck. This one remains a 3-ton tool, so a heavy-duty pickup owner should compare it against the 4- and 5-ton models instead.
Keep a portable jack clean after use and avoid storing it with the ram extended. Hydraulic service parts benefit from regular inspection rather than being left outdoors or in standing water.
10. Maxority 5 Ton Is the Capacity-First Jack for Heavy Trucks
- 11000 lb capacity
- 22 inch height
- Dual pistons
- Long handle
- Safety valve
- 100 lb weight
- 90-day warranty
5 ton
22 inch maximum lift
Dual piston steel
The Maxority has the highest published rating in this roundup: 5 tons, or 11,000 pounds. Its steel construction, dual-piston system, anti-slip rubber-padded saddle, extra-long handle, and 22-inch maximum height put the focus squarely on heavier home-workshop lifting.
For owners asking about the best floor jack for a 3/4-ton truck, this is the capacity-first model I would investigate after confirming the truck’s actual weight and lift-point access. Heavy-duty trucks often need more than the common 3-ton minimum discussed in forums.
The best fit is a heavy pickup that needs a 5-ton published rating
This is the natural match for an owner who wants to move beyond 4-ton capacity for substantial trucks and equipment. The long handle gives added pumping leverage, and the 22-inch height adds useful range over common 20-inch designs.
Capacity should always exceed the portion of the vehicle being lifted, but that calculation can be affected by load distribution and lift location. Consult the vehicle manual and use stands with suitable ratings before beginning work.
The tradeoff is its 100-pound weight and shorter warranty period
A 100-pound steel floor jack is a shop fixture, not a casual carry item. Plan a clear storage spot and a smooth route from storage to the truck, especially if your garage has floor transitions.
The product data lists a 90-day warranty and a 4.3 rating from 135 reviews. Those facts do not disqualify it, but they are good reasons to inspect it carefully on arrival and follow the maintenance instructions.
A Truck Floor Jack Should Match Capacity, Lift Range, and Surface
Start with the truck, not the jack. Find the vehicle’s GVWR and curb-weight information, identify the manufacturer-approved lifting points, and choose a jack whose published capacity gives a comfortable margin for the part of the vehicle you are raising.
For many light trucks and SUVs, a 3-ton floor jack is a sensible baseline for home maintenance. The research from truck communities is consistent on this point, while owners of F-250-, Ram 2500-, and larger classes often favor 4- to 6-ton equipment.
The correct capacity is greater than the weight you will support
A floor jack’s ton rating is its rated lifting capacity, not a suggestion to lift any truck with that GVWR at one arbitrary point. Weight is not always divided evenly, and cargo, accessories, angles, and where the saddle contacts the truck all change the load on the jack.
As a practical filter, begin at 3 tons for normal light-duty truck maintenance, look at 4 tons for additional capacity margin, and consider the 5-ton Maxority for particularly heavy applications. Do not confuse a floor jack with a bottle jack: bottle jacks can offer height and capacity in a smaller form, but their narrow footprint is less convenient for many garage tasks.
The right lift range reaches the jack point before it reaches the truck
Minimum height tells you whether the jack can roll under the chosen lift point. Maximum height tells you whether it can raise the tire or axle high enough to place stands and complete the work.
For stock-height trucks, roughly 20 inches is often workable. A lifted truck may need a tall high-lift model, an appropriate extension system designed for that jack, or a different lifting approach; never stack blocks under a jack to create height.
Steel suits a fixed garage while aluminum reduces carrying burden
Steel floor jacks are generally the choice for a heavy, stable garage tool, but 87- to 103-pound models are hard to move across rough surfaces. Aluminum and aluminum-steel designs can lower the carrying burden, as the 63-pound VEVOR illustrates.
Material alone does not decide safety or service life. Look at the whole package: the rated capacity, wheel and caster condition, saddle design, hydraulic control, manufacturer support, and whether the jack fits your actual lifting routine.
A dual-piston pump lifts faster but does not make setup safer
A dual-piston floor jack uses two hydraulic pumping pistons to move fluid more quickly, so it generally reaches working height with fewer handle strokes than a single-piston design. That saves effort during repeated work such as tire rotations.
Fast lifting should never become rushed lifting. Raise the saddle until it just contacts the approved point, recheck alignment from the side, keep hands clear, and then continue in controlled strokes.
Jack stands are mandatory before anyone works under the truck
A floor jack raises the truck; jack stands support it. Once the truck is at the required height, position rated stands at approved support points and lower the truck gently onto them before going underneath.
Work on a hard, level surface, chock the wheels that remain on the ground, set the parking brake where appropriate, and never work under a truck supported only by hydraulic pressure. For protecting a frequently used work area, see these garage floor mats and tiles.
Basic hydraulic care keeps a floor jack predictable
Before each session, check for fluid leaks, damaged welds, bent handles, cracked wheels, and a saddle that does not sit squarely. Operate the release valve without load first so you know it lowers smoothly and gradually.
Store the jack clean, dry, and fully lowered, and follow the maker’s instructions for hydraulic fluid and bleeding. The forum research highlights quality-control concerns on some budget equipment, so an arrival inspection is time well spent.
FAQs
What size floor jack do I need for a truck?
A 3-ton floor jack is a practical minimum for many light trucks and SUVs, while heavier 3/4-ton and one-ton trucks often call for 4- to 5-ton equipment. Check the truck manual, actual vehicle weight, lifting point, and the jack’s lift range before choosing.
What is a dual-piston floor jack?
A dual-piston floor jack uses two hydraulic pumping pistons to raise the saddle with fewer handle strokes than a typical single-piston design. It is faster to operate, but correct placement, a level surface, and jack stands remain required.
Are aluminum floor jacks worth it for trucks?
Aluminum floor jacks are worth considering when you need a lighter jack to carry or position. They can still be rated for truck service, but choose by published capacity and lift range first; a heavier steel jack may suit a fixed garage better.
Do I need to use jack stands with a floor jack?
Yes. A floor jack is for lifting, while jack stands are for supporting the truck during work. Never place any part of your body beneath a vehicle that is held up only by a hydraulic floor jack.
The Right Truck Floor Jack Matches Your Work
The BIG RED is the strongest all-around 3-ton choice for everyday truck maintenance, the LARBANKE and Jack Boss add 4-ton capacity for heavier full-size work, and the Maxority is the capacity-led pick at 5 tons. For a lifted truck or soft surfaces, the Strongway off-road model’s 29-inch lift and skid plate solve a different problem.
The best floor jacks for trucks in 2026 are the ones that fit your truck’s stated lift points, reach the required height, and work alongside rated jack stands. Pick the appropriate capacity, inspect the jack before use, and make safety the first part of every repair.